CB1100 Forum
Turn Signal mounts OEM - Printable Version

+- CB1100 Forum (http://cb1100forum.com/forum)
+-- Forum: Honda CB1100 Discussions (/forumdisplay.php?fid=1)
+--- Forum: Mechanical & Technical (/forumdisplay.php?fid=3)
+--- Thread: Turn Signal mounts OEM (/showthread.php?tid=12461)



Turn Signal mounts OEM - HWdesign - 04-14-2018 07:07 PM

My 2013 came with the blinkers mounted on the tall light bracket via a small other bracket.

I'm looking to mount them on the grab rail and am in need of some washer, or a bolt and a washer, that holds the turn signal to the grab rail. If anyone has these parts laying around I am in need and am willing to pay some cash money Smile

Thought I would check here before calling a dealer.

Thanks in advance,

HW


RE: Turn Signal mounts OEM - Lord Popgun - 04-15-2018 04:16 AM

Items 9,10 and 14 are what you need: https://www.partzilla.com/catalog/honda/motorcycle/2013/cb1100-ac/turn-signal


RE: Turn Signal mounts OEM - HWdesign - 04-15-2018 05:52 AM

Cool
(04-15-2018 04:16 AM)popgun Wrote:  Items 9,10 and 14 are what you need: https://www.partzilla.com/catalog/honda/motorcycle/2013/cb1100-ac/turn-signal

thanks. I have all of those parts. What I believe I need is part 8 on this schematic.

Anyone have a pair of these that you are not using?


RE: Turn Signal mounts OEM - Lord Popgun - 04-15-2018 06:07 AM

Yeah, those too. I forgot about those...


RE: Turn Signal mounts OEM - HWdesign - 04-15-2018 07:04 AM

(04-15-2018 06:07 AM)popgun Wrote:  Yeah, those too. I forgot about those...

So many parts, so little time...

thanks


RE: Turn Signal mounts OEM - Lord Popgun - 04-15-2018 07:09 AM

Any chance its still there? Reach your finger around and see if you can feel it. Or look.


RE: Turn Signal mounts OEM - HWdesign - 04-15-2018 07:32 AM

(04-15-2018 07:09 AM)popgun Wrote:  Any chance its still there? Reach your finger around and see if you can feel it. Or look.

Nope not there. Not a huge deal the part is cheap enough. I'll order it if no one has them laying around.

thanks

HW


RE: Turn Signal mounts OEM - PowerDubs - 04-16-2018 06:31 AM

Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.

The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.


RE: Turn Signal mounts OEM - HWdesign - 04-16-2018 07:18 AM

(04-16-2018 06:31 AM)PowerDubs Wrote:  Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.

The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.

I totally understand. All good.


RE: Turn Signal mounts OEM - HWdesign - 04-17-2018 08:07 PM

(04-16-2018 06:31 AM)PowerDubs Wrote:  Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.

The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.

Tried to send you a PM but your box is full

Happy to send you the bracket. It's a small bit of metal. Give me your address and I will send it to you.

Howard