I'm on a bit of a journey with this bike. After putting a couple thousand miles on it and learning what I like and don't like I'm starting to make some more changes.
Today I completed the "controls" update. I started with Pazzo levers when I first got the bike but finished up by adding Rizoma risers, Renthal bars and Rizoma bar ends. The mirrors are the Bikemaster Tube mirrors. I also changed out the turn signals for the LP aluminum ones front and rear which are way smaller and look way less goofy than the stock '13 signals. I have the Puig raptor on there but honestly I don't think I like the look. I've got a Dart on the way in midnight and I am going to try that as well. Based on what I am seeing I think I will prefer the Dart.
The position is a lot more natural to me, I felt like I was halfway between forward controls position and standard. This gets my torso a bit more forward, my wrists a bit more straight and puts my hips in a better position on the Corbin seat and it's even more comfortable now. Again key words here are "for me".
Headlight is the JW Speaker and I have a thread for it here:
http://cb1100forum.com/forum/showthread.php?tid=11421
This winter I have a few things planned. I'm going to be powdercoating the wheels black, and I am going to try to replicate the Bad Seeds side covers. I'm going to leave the fenders chrome as I don't want a completely blacked out look. Along with this I am going to be moving to a 19T front sprocket and I'll be doing a bunch of driveline maintenance (new chain, cush, tires). I've already replaced the pads with EBC HH and they bite great.
I have some cheapo aluminum pegs on there. The rubber OEM ones felt too bulky to me and I felt disconnected to the bike when pushing on the outside peg in turns. The rubber moved around too much on the peg.
Still torn on the SW Motech bars. I'm not into the look of them and I already pay for insurance on the bike so why do I need them. I don't have the OEM hardware that goes back on it so that's the only thing keeping me from ripping them off right now.
I'm also going to swap out these ridiculously terrible stock shocks for something that holds a solid line in a rough turn. These shocks are great for relaxed riding but as soon as you get a little aggressive with them they fall apart. Still trying to figure out what to get here. My heart says Ohlins but my brain tells me that there are other choices. I want something a bit better than the Ikons. (Nothing against them just looking for something I can push a bit harder, the roads I ride on are not in the greatest condition).
Anyways, no post complete without pics. I'll use this as my "build thread" for those who are interested in watching this hot mess.
Keep an eye on the classifieds section for anything that comes off the bike, as I'll be trying to unload the stuff here before I go to ebay.