Post Reply 
 
Thread Rating:
  • 3 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
K FACTORY CSR Exhaust
Author Message
grover Offline
Running Like a Top

Dallas, TX
Posts: 313
Joined: Sep 2013
Post: #61
RE: K FACTORY CSR Exhaust
(03-11-2015 08:17 AM)DGShannon Wrote:  Old thread, and the idea that you might be able to change the oil & filter without removing the header was left hanging. Anyone prove it one way or the other?

+1...BUMP! Smile
03-17-2015 10:13 AM
Find all posts by this user Quote this message in a reply
Yeahoo Whoyah Offline
Break-In Period

California
Posts: 21
Joined: Mar 2015
Post: #62
RE: K FACTORY CSR Exhaust
In addition to the oil filter issue, what modifications were needed to the FI to get the fueling right after modifying the exhaust system?

Good advice is something a man gives when he is too old to set a bad example.
03-23-2015 02:03 PM
Find all posts by this user Quote this message in a reply
okredneck Offline
Break-In Period

Watts,oklahoma
Posts: 16
Joined: Oct 2017
Post: #63
RE: K FACTORY CSR Exhaust
I received my K factory pipes and they will not mount up to the exhaust ports I can get 3 of the 4 matched up but not all 4
12-01-2017 09:33 AM
Find all posts by this user Quote this message in a reply
Gumby 1100 Offline
Running Like a Top

Cambridge, Ontario, Canada
Posts: 489
Joined: May 2014
Post: #64
RE: K FACTORY CSR Exhaust
(12-01-2017 09:33 AM)okredneck Wrote:  I received my K factory pipes and they will not mount up to the exhaust ports I can get 3 of the 4 matched up but not all 4

OK,

Is one of the pipes physically not reaching or not centered over the exhaust port?
If that is the case, perhaps your header got damaged (bent) in transit.

Did you try rotating one or more of the flange plates. They are not symmetrical and each one must be oriented correctly to fit and for the studs to align.

2014 CB1100A (Canadian) #068 (Sold)
2018 Harley-Davidson Road King
12-02-2017 05:49 AM
Find all posts by this user Quote this message in a reply
okredneck Offline
Break-In Period

Watts,oklahoma
Posts: 16
Joined: Oct 2017
Post: #65
RE: K FACTORY CSR Exhaust
(12-02-2017 05:49 AM)Gumby 1100 Wrote:  
(12-01-2017 09:33 AM)okredneck Wrote:  I received my K factory pipes and they will not mount up to the exhaust ports I can get 3 of the 4 matched up but not all 4

OK,

Is one of the pipes physically not reaching or not centered over the exhaust port?
If that is the case, perhaps your header got damaged (bent) in transit.

Did you try rotating one or more of the flange plates. They are not symmetrical and each one must be oriented correctly to fit and for the studs to align.

Tried rotating the flanges and still no joy don't see that it was bent but was wondering if anyone had the same problem.
12-02-2017 09:01 AM
Find all posts by this user Quote this message in a reply
superjim Offline
Break-In Period

south carolin
Posts: 15
Joined: Aug 2018
Post: #66
RE: K FACTORY CSR Exhaust
(08-07-2013 04:43 AM)silascopathic Wrote:  Ok so here are some pictures of the exhaust almost fully installed. Getting the O2 sensor out of the factory exhaust is gonna be a cuss. its in there pretty tight and i do not have a lot of wiggle room.

I also upgraded the baffle as you can see from the pictures. I could just remove it but i'm not looking for a super loud sound. although when i do videos of the bike with the pipe i will include a video of the exhaust sans baffle.

anyway. here are some pictures. they are crappy but its better than no pictures!

İmage
İmage
İmage
İmage


can you give me the details on the baffle upgrade you did? Where did you get it?
12-01-2018 08:27 PM
Find all posts by this user Quote this message in a reply
GoldOxide Offline
Lives On Two Wheels

Southern Ontario, Canada
Posts: 17,814
Joined: Jan 2015
Post: #67
RE: K FACTORY CSR Exhaust
The bike looks great even without the wheels.

>>> Spring is an extension to the riding season. ¯\(ツ)/¯ <<<
12-01-2018 08:36 PM
Find all posts by this user Quote this message in a reply
Cormanus Offline
Moderator

Queensland, Australia
Posts: 20,659
Joined: Dec 2013
Post: #68
RE: K FACTORY CSR Exhaust
superjim, Silas has not been around for about 3 years now. I guess you could try and email or PM.
12-01-2018 11:45 PM
Find all posts by this user Quote this message in a reply
Post Reply 


[-]
Forum Friends
Premium Exhausts & Unique Parts from Japan

[-]
Recent Posts
Todays weather
Partly sunny, cool, windy and 48 miles . . .GoldOxide — 07:46 PM
What did you do to/with your other bike?
... That looks like it was comforting, . . .pdedse — 05:17 PM
Todays weather
That’s the spirit, peterbaron! Keep th . . .Cormanus — 03:34 PM
What did you do to/with your other bike?
What a fun trip! Didn't know they made a . . .Gone in 60 — 03:16 PM
Todays weather
Partly sunny, cool, windy and 48 miles o . . .peterbaron — 03:12 PM
What did you do to/with your other bike?
Great pics, pdedse.Cormanus — 02:55 PM
The Cormanus Chronicles: Remembering Jake an...
I’m sure contemporary rollers have som . . .Cormanus — 02:53 PM
Todays weather
Correct, Gone.Cormanus — 02:46 PM

[-]
Statistics
» Members: 6,517
» Latest member: keedonald
» Forum threads: 15,975
» Forum posts: 329,750

Full Statistics

>
Forum Jump: