Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LED'Ss and other Electrical Q's
Author Message
edd_of_the_hill Offline
Break-In Period

New York City
Posts: 8
Joined: Jul 2016
Post: #1
LED'Ss and other Electrical Q's
Hey Everyone,

I'm finally getting ready to delete those protruding indicators but I have a few minor techincal questions for those more familiar with the bike than I am.

For starters: I am prepping to add fork wrap arounds like these:
https://www.revzilla.com/motorcycle/new-...rn-signals

I also have the tail delete from samurider.com (which i love) but i think i'm going to install this Rear Tailight:
https://www.admorelighting.com/product/a...ology-new/

I want to make sure these add's will work with my 2014 ex so i want to also add the proper connectors. Pretty sure the turn indicators are the 2 Pin HC .050 Turn Signal Connector (confirm?) that i can grab from cycleterminal.com.

Is a relay absolutely necessary or is the electrical system robust enough?

Also on this overhaul I'm planning on removing the stock headlight mount and replacing it with something a little more "practical" as our mounts are kinda rediculous. Any tips would be appreciated there as well.

Also feel to post any other LED questions here as maybe we can start an overall thread to (in my mind) a superior lighting upgrade.

Thanks
07-06-2017 12:21 PM
Find all posts by this user Quote this message in a reply
Cormanus Offline
Moderator

Queensland, Australia
Posts: 20,659
Joined: Dec 2013
Post: #2
RE: LED'Ss and other Electrical Q's
Welcome to the forum edd_of_the_hill. Have you had the bike since new?
(This post was last modified: 07-06-2017 04:15 PM by Cormanus.)
07-06-2017 02:46 PM
Find all posts by this user Quote this message in a reply
TwoBrothersBusa Offline
1st Service Completed

TN
Posts: 108
Joined: Jun 2017
Post: #3
RE: LED'Ss and other Electrical Q's
I was curious about the tail delete so me and mr. google found this...I think it looks really nice on this bike!

Do you have a picture of yours you could share?

İmage

2014 CB1100
2018 Street Triple R
2016 R1200RT
2017 GSXR1000 - Track Duty
07-06-2017 04:07 PM
Find all posts by this user Quote this message in a reply
Lord Popgun Offline
I find your lack of RLETs disturbing

Virginia Beach
Posts: 10,442
Joined: Apr 2013
Post: #4
RE: LED'Ss and other Electrical Q's
Welcome Edd!

The turn signals have 2 wires with 3.5mm male bullet connectors. I have a spare set of signals and just measured them with a digital micrometer to verify. Cycle Terminal is a good source for them. I got a mulitpin connector set and crimper from them to use on my CB as I do not like to splice into factory harnesses if at all possible. YMMV.

Admore supplies Posi Lock connectors which are supposed to be real good, but I have no experience with them.

Admore does not list a current draw or power consumption for the light you referenced, but the kit shows no relay. You should not need one. A number of members have changed to LED without any problems.

It IS a cool unit, computer programmable and all. I believe you are the first to reference the wrap around signals. I've never seen those.

If you come to a fork in the road, take it!
2013 CB1100
2012 ST1300
Holder of the CB1100Forum Secret Decoder Ring
(This post was last modified: 07-06-2017 04:11 PM by Lord Popgun.)
07-06-2017 04:10 PM
Find all posts by this user Quote this message in a reply
edd_of_the_hill Offline
Break-In Period

New York City
Posts: 8
Joined: Jul 2016
Post: #5
LED'Ss and other Electrical Q's
(07-06-2017 02:46 PM)Cormanus Wrote:  Welcome to the forum edd_of_the_hill. Have you had the bike since new?

Thanks, Yea i have, and i love it


(07-06-2017 04:10 PM)popgun Wrote:  Welcome Edd!

The turn signals have 2 wires with 3.5mm male bullet connectors. I have a spare set of signals and just measured them with a digital micrometer to verify. Cycle Terminal is a good source for them. I got a mulitpin connector set and crimper from them to use on my CB as I do not like to splice into factory harnesses if at all possible. YMMV.

Admore supplies Posi Lock connectors which are supposed to be real good, but I have no experience with them.

Admore does not list a current draw or power consumption for the light you referenced, but the kit shows no relay. You should not need one. A number of members have changed to LED without any problems.

It IS a cool unit, computer programmable and all. I believe you are the first to reference the wrap around signals. I've never seen those.

cool, all sounds good in theory.

my only prob now is the admore light seems to only supply one wire for turn light function. if the connector harness is two pin where should my return be going/coming? will it matter?

i guess i'll find out tomorrow.







Sent from my iPhone using Tapatalk

(07-06-2017 04:07 PM)TwoBrothersBusa Wrote:  I was curious about the tail delete so me and mr. google found this...I think it looks really nice on this bike!

Do you have a picture of yours you could share?

İmage


İmage


Sent from my iPhone using Tapatalk
(This post was last modified: 07-21-2017 01:07 PM by edd_of_the_hill.)
07-21-2017 01:02 PM
Find all posts by this user Quote this message in a reply
Lord Popgun Offline
I find your lack of RLETs disturbing

Virginia Beach
Posts: 10,442
Joined: Apr 2013
Post: #6
RE: LED'Ss and other Electrical Q's
My guess is that your new light pulls its ground from the chassis when you bolt it on. Most stuff on our bike, from the factory gets grounds from ground wires run to them. The other end of the wires ends up at a chassis connection. So, for example, a turn signal has a ground connection and a 'hot' wire.

When you bolt up your new lights and they don't ground, you may have to connect it to the bike ground wire somehow. Since I do not know how much you know about about electricity/electronics don't get offended please, but all circuits need a ground and a source voltage.

The ground wires on the bike are green. You can verify with a DVOM.

If you need a wiring diagram, PM me.

If you come to a fork in the road, take it!
2013 CB1100
2012 ST1300
Holder of the CB1100Forum Secret Decoder Ring
07-21-2017 02:22 PM
Find all posts by this user Quote this message in a reply
edd_of_the_hill Offline
Break-In Period

New York City
Posts: 8
Joined: Jul 2016
Post: #7
LED'Ss and other Electrical Q's
(07-21-2017 02:22 PM)popgun Wrote:  So, for example, a turn signal has a ground connection and a 'hot' wire. ...

If you need a wiring diagram, PM me.


Thanks. That gives me a better idea in general. Im gunna give a survey under the seat tomorrow and with any luck an install.


Sent from my iPhone using Tapatalk
07-21-2017 04:40 PM
Find all posts by this user Quote this message in a reply
Lord Popgun Offline
I find your lack of RLETs disturbing

Virginia Beach
Posts: 10,442
Joined: Apr 2013
Post: #8
RE: LED'Ss and other Electrical Q's
Good luck edd! In my post above, I meant to say, IF YOU bolt up the lights and they don't ground. Not when. Sorry Smile

If you come to a fork in the road, take it!
2013 CB1100
2012 ST1300
Holder of the CB1100Forum Secret Decoder Ring
07-22-2017 04:18 AM
Find all posts by this user Quote this message in a reply
Post Reply 


[-]
Forum Friends
Premium Exhausts & Unique Parts from Japan

[-]
Recent Posts
Triumph Thruxton RS Final Edition
I'm a bit different, i went in for a 2nd . . .m in sc — 01:01 PM
Triumph Thruxton RS Final Edition
I am liking the drama of this thread, Mr . . .GoldOxide — 12:50 PM
CB1100 Monthly Photo Challenge
Nah, just routine - catch, flip on bac . . .GoldOxide — 12:47 PM
Triumph Thruxton RS Final Edition
Looking back at your offer, that is very . . .Gone in 60 — 11:59 AM
Triumph Thruxton RS Final Edition
The same bike not even broken in with . . .m in sc — 11:53 AM
What did you do on, or to, your CB today?
Chilly but sunny day and another 87 mile . . .peterbaron — 11:51 AM
CB1100 Monthly Photo Challenge
:clap:peterbaron — 11:50 AM
Triumph Thruxton RS Final Edition
The same bike not even broken in with 1, . . .Ollie — 11:46 AM

[-]
Statistics
» Members: 6,518
» Latest member: JoshuaER
» Forum threads: 15,974
» Forum posts: 329,763

Full Statistics

>
Forum Jump: