(08-08-2017 01:29 PM)popgun Wrote: The 2 bolts I have left over are 65 and 60mm so I guess I used the 55mm. When you get done, the OEM plastic chrome nut cap will fit in the Ramball hole and finish it off.
Torque to 15 ft.lbs. If you remove them all, the books says tighten the fronts first, then the rears.
Yep, that's the one. I just read where the ball occupies 30mm, hence 25mm stock screw length + 30mm = 55mm. THANK YOU!