Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Outside lower fork tube diameter
Author Message
Mscb1100 Online
1st Service Completed

Mississippi
Posts: 167
Joined: Aug 2017
Post: #1
Outside lower fork tube diameter
Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Looks fast sitting still
01-12-2018 02:13 PM
Find all posts by this user Quote this message in a reply
Aussieflyer Offline
1st Service Completed

Melbourne Australia
Posts: 237
Joined: Nov 2013
Post: #2
RE: Outside lower fork tube diameter
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.
01-12-2018 03:19 PM
Find all posts by this user Quote this message in a reply
Mscb1100 Online
1st Service Completed

Mississippi
Posts: 167
Joined: Aug 2017
Post: #3
Outside lower fork tube diameter
(01-12-2018 03:19 PM)Aussieflyer Wrote:  
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.


On the fork leg just below the fork seal
No mudguard on US models that I know of on the forks



Sent from my iPad using Tapatalk

Looks fast sitting still
01-12-2018 03:31 PM
Find all posts by this user Quote this message in a reply
Aussieflyer Offline
1st Service Completed

Melbourne Australia
Posts: 237
Joined: Nov 2013
Post: #4
RE: Outside lower fork tube diameter
(01-12-2018 03:31 PM)Mscb1100 Wrote:  
(01-12-2018 03:19 PM)Aussieflyer Wrote:  
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.


On the fork leg just below the fork seal
No mudguard on US models that I know of on the forks



Sent from my iPad using Tapatalk

The widest OD of the fork lower, where the seal seats, is 62.9mm.
The narrowest OD of the fork lower is 50.9mm.
All models have lugs for a mudguard, perhaps it's a terminology thing. What do you call that half round metal thing over the top of the front wheel ... a fender?
01-12-2018 03:49 PM
Find all posts by this user Quote this message in a reply
Mscb1100 Online
1st Service Completed

Mississippi
Posts: 167
Joined: Aug 2017
Post: #5
RE: Outside lower fork tube diameter
(01-12-2018 03:49 PM)Aussieflyer Wrote:  
(01-12-2018 03:31 PM)Mscb1100 Wrote:  
(01-12-2018 03:19 PM)Aussieflyer Wrote:  
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.


On the fork leg just below the fork seal
No mudguard on US models that I know of on the fender



Sent from my iPad using Tapatalk

The widest OD of the fork lower, where the seal seats, is 62.9mm.
The narrowest OD of the fork lower is 50.9mm.
All models have lugs for a mudguard, perhaps it's a terminology thing. What do you call that half round metal thing over the top of the front wheel ... a fender?

In Mississippi that half round metal thing over both wheels is typically called and spelled “fenda” lolHello
Seriously, thanks for the measurements.
We call a rubba flap hangin frum the fenda a mudguard

Aussieflyer
Do you have a side view picture or your bike
It has an interesting paint scheme

Looks fast sitting still
(This post was last modified: 01-12-2018 04:08 PM by Mscb1100.)
01-12-2018 04:01 PM
Find all posts by this user Quote this message in a reply
Aussieflyer Offline
1st Service Completed

Melbourne Australia
Posts: 237
Joined: Nov 2013
Post: #6
RE: Outside lower fork tube diameter
MSCB you're welcome.
There are a few pics in this post:
http://cb1100forum.com/forum/showthread....974&page=6
01-12-2018 05:34 PM
Find all posts by this user Quote this message in a reply
Post Reply 


[-]
Forum Friends
Premium Exhausts & Unique Parts from Japan

[-]
Recent Posts
Sparky's New Ride
Now THAT's a good looking motorcycle! :c . . .Guth — 06:53 PM
tps evaluating for ii issues
Doc - thank you for all your help. I wil . . .Dave — 06:51 PM
A GS1100 To Restore
Looking good so far, Redbirds! If y . . .Flynrider — 06:47 PM
2017 More Power...?
As currently noted elsewhere on this for . . .Guth — 06:46 PM
2017 More Power...?
FEW ponies more at 86 or 89 means ZERO t . . .peterbaron — 06:41 PM
Staintune
Sounds like you had it mounted wrong! . . .Guth — 06:38 PM
2017 More Power...?
I have noticed in a few instances on . . .dbarkdoll — 06:30 PM
oh no! not oil!
You could go 5000 miles and pay twice th . . .Houtman — 06:25 PM

[-]
Statistics
» Members: 3,954
» Latest member: acro
» Forum threads: 10,191
» Forum posts: 184,188

Full Statistics

>
Forum Jump: