Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Outside lower fork tube diameter
Author Message
Mscb1100 Offline
1st Service Completed

Mississippi
Posts: 162
Joined: Aug 2017
Post: #1
Outside lower fork tube diameter
Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Looks fast sitting still
01-12-2018 02:13 PM
Find all posts by this user Quote this message in a reply
Aussieflyer Offline
1st Service Completed

Melbourne Australia
Posts: 235
Joined: Nov 2013
Post: #2
RE: Outside lower fork tube diameter
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.
01-12-2018 03:19 PM
Find all posts by this user Quote this message in a reply
Mscb1100 Offline
1st Service Completed

Mississippi
Posts: 162
Joined: Aug 2017
Post: #3
Outside lower fork tube diameter
(01-12-2018 03:19 PM)Aussieflyer Wrote:  
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.


On the fork leg just below the fork seal
No mudguard on US models that I know of on the forks



Sent from my iPad using Tapatalk

Looks fast sitting still
01-12-2018 03:31 PM
Find all posts by this user Quote this message in a reply
Aussieflyer Offline
1st Service Completed

Melbourne Australia
Posts: 235
Joined: Nov 2013
Post: #4
RE: Outside lower fork tube diameter
(01-12-2018 03:31 PM)Mscb1100 Wrote:  
(01-12-2018 03:19 PM)Aussieflyer Wrote:  
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.


On the fork leg just below the fork seal
No mudguard on US models that I know of on the forks



Sent from my iPad using Tapatalk

The widest OD of the fork lower, where the seal seats, is 62.9mm.
The narrowest OD of the fork lower is 50.9mm.
All models have lugs for a mudguard, perhaps it's a terminology thing. What do you call that half round metal thing over the top of the front wheel ... a fender?
01-12-2018 03:49 PM
Find all posts by this user Quote this message in a reply
Mscb1100 Offline
1st Service Completed

Mississippi
Posts: 162
Joined: Aug 2017
Post: #5
RE: Outside lower fork tube diameter
(01-12-2018 03:49 PM)Aussieflyer Wrote:  
(01-12-2018 03:31 PM)Mscb1100 Wrote:  
(01-12-2018 03:19 PM)Aussieflyer Wrote:  
(01-12-2018 02:13 PM)Mscb1100 Wrote:  Does anyone know the lower fork tube measurement in inches and or mm? I need to order some fittings to install some Denali lights I have left over from another project.
Thanks

Not sure where you're planning to mount the lights ...
The section just below the mudguard mount and above disc rotor has room for bracket. It measures 2" OD.


On the fork leg just below the fork seal
No mudguard on US models that I know of on the fender



Sent from my iPad using Tapatalk

The widest OD of the fork lower, where the seal seats, is 62.9mm.
The narrowest OD of the fork lower is 50.9mm.
All models have lugs for a mudguard, perhaps it's a terminology thing. What do you call that half round metal thing over the top of the front wheel ... a fender?

In Mississippi that half round metal thing over both wheels is typically called and spelled “fenda” lolHello
Seriously, thanks for the measurements.
We call a rubba flap hangin frum the fenda a mudguard

Aussieflyer
Do you have a side view picture or your bike
It has an interesting paint scheme

Looks fast sitting still
(This post was last modified: 01-12-2018 04:08 PM by Mscb1100.)
01-12-2018 04:01 PM
Find all posts by this user Quote this message in a reply
Aussieflyer Offline
1st Service Completed

Melbourne Australia
Posts: 235
Joined: Nov 2013
Post: #6
RE: Outside lower fork tube diameter
MSCB you're welcome.
There are a few pics in this post:
http://cb1100forum.com/forum/showthread....974&page=6
01-12-2018 05:34 PM
Find all posts by this user Quote this message in a reply
Post Reply 


[-]
Forum Friends
Premium Exhausts & Unique Parts from Japan

[-]
Recent Posts
Saddlebags
To displace the turnsignals is not an . . .Leonard — 11:32 PM
Saddlebags
To displace the turnsignals is not an op . . .Wisedrum — 11:21 PM
Thread Drift
I'm just glad I don't have to encounter . . .Ben70 — 10:53 PM
Revisiting rain gear purchases
I prefer my rain gear to be the outer la . . .EmptySea — 10:24 PM
Dyno results....Re-dyno after reflash?
I'm sorry to be the party pooper here; b . . .TINK — 10:09 PM
2013 vs 2017
562 lbs for which one, Ulvetanna?Cormanus — 09:56 PM
Thread Drift
Geez, you two! This tragedy is getting w . . .Cormanus — 09:17 PM
Saddlebags
Japanese police panniers? FWIW, I was t . . .rotor — 08:42 PM

[-]
Statistics
» Members: 3,952
» Latest member: operider
» Forum threads: 10,179
» Forum posts: 183,819

Full Statistics

>
Forum Jump: