markT
Break-In Period
England
Posts: 33
Joined: Feb 2018
|
Torque Settings For Bars & Levers Please?
Hi Folks,
I had to slacken the handlebar clamp and higher the bars slightly on my 1100 ex.
Does anyone with a Service Manual know the correct torque values for -
Bar Clamp
Brake & Clutch Lever Perch
Bar Switch Units
Cos I think they all might need adjusting slightly and the bar clamps definitely need re-torqueing.
Is there a torque setting chart anywhere on here ??
Many Thanks
Kawasaki ZRX 1200R A1P
Suzuki GSX1400 K6 Final Edition
Honda CB1100 SAE
|
|
02-23-2018 11:22 AM |
|
Lord Popgun
I find your lack of RLETs disturbing
Virginia Beach
Posts: 10,442
Joined: Apr 2013
|
RE: Torque Settings For Bars & Levers Please?
The 4 handlebar clamps are 15 ft lbs. Tighten the top ones first.
Clutch master cylinder holder bolt (2)—9ft lbs. Same for the brake bolts
Bar switch units are not listed in the table or manual section on them. So use the Standard torque values table. They are screws, so 5mm screw is 3.1 ft lbs, and 6mm screw is 6.6 ft lbs.
If you come to a fork in the road, take it!
2013 CB1100
2012 ST1300
Holder of the CB1100Forum Secret Decoder Ring
|
|
02-23-2018 12:54 PM |
|
markT
Break-In Period
England
Posts: 33
Joined: Feb 2018
|
RE: Torque Settings For Bars & Levers Please?
Great Thanks,
Will do
Kawasaki ZRX 1200R A1P
Suzuki GSX1400 K6 Final Edition
Honda CB1100 SAE
|
|
02-23-2018 03:26 PM |
|