cbfan
1st Service Completed
Texas
Posts: 193
Joined: Jul 2013
|
Risers
Does anyone know if 1" upward and 1.25" backward risers will work with stock equipment, is there 'nough slack?
|
|
09-28-2013 09:56 AM |
|
Hittheroad
1st Service Completed
MN
Posts: 80
Joined: Aug 2013
|
RE: Risers
I have installed the Genmar 7/8" risers 1" up and 1.25 back and they work great! Very solid. However, you will be very tight on the throttle cables and front brake line. The left side seemed ok. Plus, you can't tilt the bars back much because there's not enough slack. I wasn't comfortable with them that tight so I only rode them about 100 miles before removing them and going back to stock for the rest of the season. I will wait for the winter to get the cables rerouted and reinstall the risers.
|
|
09-28-2013 07:58 PM |
|
cbfan
1st Service Completed
Texas
Posts: 193
Joined: Jul 2013
|
RE: Risers
So 1 up and 1 back might work better?
|
|
09-28-2013 08:50 PM |
|
Hittheroad
1st Service Completed
MN
Posts: 80
Joined: Aug 2013
|
RE: Risers
(This post was last modified: 09-29-2013 05:58 AM by Hittheroad.)
|
|
09-29-2013 05:47 AM |
|