Post Reply 
 
Thread Rating:
  • 2 Votes - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OEM Rear Rack- Fitting
Author Message
Pterodactyl Offline
Road Warrior

Sydney, Australia
Posts: 2,731
Joined: Sep 2013
Post: #11
RE: OEM Rear Rack- Fitting
(05-12-2015 09:33 PM)Ghis Wrote:  I was able to slide a size 12 flat wrench over the nuts to keep them from spinning while tightening the bolts. The closed end of the wrench goes right in there.

Thanks for posting that Ghis. That is now what I do as well. Just start the nuts by hand and then put the 12mm ring spanner over the nut and then tighten from the bolt end.

Having removed and replaced that rack many times now I could probably update the post but if anyone follows the general outline they will soon work out what suits them.

Cheers
(This post was last modified: 05-13-2015 02:36 AM by Pterodactyl.)
05-13-2015 02:34 AM
Find all posts by this user Quote this message in a reply
Redbird Offline
1st Service Completed

Lyons. CO USA
Posts: 230
Joined: Apr 2015
Post: #12
RE: OEM Rear Rack- Fitting
Indeed! I printed off this thread and used it when I installed my rack yesterday. It was a big help to me. The socks over the turn signals is a great tip to save them from allen wrench scrapes. Thank you Pterodactyl for the very clear write up and all the pics.
05-22-2015 10:32 AM
Find all posts by this user Quote this message in a reply
Pterodactyl Offline
Road Warrior

Sydney, Australia
Posts: 2,731
Joined: Sep 2013
Post: #13
RE: OEM Rear Rack- Fitting
No worries mate. A pleasure.

Cheers
05-23-2015 12:39 AM
Find all posts by this user Quote this message in a reply
kennyw Offline
High Mileage

Gold Bar
Posts: 1,098
Joined: May 2015
Post: #14
RE: OEM Rear Rack- Fitting
(07-12-2014 12:37 AM)Pterodactyl Wrote:  I remove and replace my rack at regular intervals.

Any chance I can talk you into measuring the bolts and spacers next time you take it off? I purchased this rack and the hardware was lost in shipping.

Are all of the supplied bolts socket head cap screws?

Are the spacers a constant OD (no taper or steps)?
06-08-2015 11:41 AM
Find all posts by this user Quote this message in a reply
Elipten Offline
Road Warrior

San Antonio, TX
Posts: 2,087
Joined: Nov 2013
Post: #15
OEM Rear Rack- Fitting
Send it back as without the original hardware why suffer.


Sent from my iPhone using Tapatalk

Current inventory

2014 CB1100 DLX
2013 CB1100
1990 BMW K75RT
06-08-2015 05:16 PM
Find all posts by this user Quote this message in a reply
popgun Online
Lives On Two Wheels

Virginia Beach
Posts: 6,201
Joined: Apr 2013
Post: #16
RE: OEM Rear Rack- Fitting
(06-08-2015 11:41 AM)kennyw Wrote:  
(07-12-2014 12:37 AM)Pterodactyl Wrote:  I remove and replace my rack at regular intervals.

Any chance I can talk you into measuring the bolts and spacers next time you take it off? I purchased this rack and the hardware was lost in shipping.

Are all of the supplied bolts socket head cap screws?

Are the spacers a constant OD (no taper or steps)?

If you look at the link I posted, it shows the parts. The spacers are like, well, top hats.

If you come to a fork in the road, take it!
2013 CB1100
2012 ST1300
06-08-2015 05:26 PM
Find all posts by this user Quote this message in a reply
kennyw Offline
High Mileage

Gold Bar
Posts: 1,098
Joined: May 2015
Post: #17
RE: OEM Rear Rack- Fitting
(06-08-2015 05:26 PM)popgun Wrote:  
(06-08-2015 11:41 AM)kennyw Wrote:  
(07-12-2014 12:37 AM)Pterodactyl Wrote:  I remove and replace my rack at regular intervals.

Any chance I can talk you into measuring the bolts and spacers next time you take it off? I purchased this rack and the hardware was lost in shipping.

Are all of the supplied bolts socket head cap screws?

Are the spacers a constant OD (no taper or steps)?

If you look at the link I posted, it shows the parts. The spacers are like, well, top hats.
Your link went to this thread.
06-08-2015 08:12 PM
Find all posts by this user Quote this message in a reply
popgun Online
Lives On Two Wheels

Virginia Beach
Posts: 6,201
Joined: Apr 2013
Post: #18
RE: OEM Rear Rack- Fitting
Sorry Kenny,

Thought I posted this: http://cssportal.css-club.net/honda/MCA/TERMS010.aspx

Log in as user, select larger than 1000cc, select the CB1100 (default selection seems to be the PCX). Scroll down in the accessories list and click on the .pdf for the rack or carrier.

If you come to a fork in the road, take it!
2013 CB1100
2012 ST1300
06-08-2015 08:18 PM
Find all posts by this user Quote this message in a reply
Redbird Offline
1st Service Completed

Lyons. CO USA
Posts: 230
Joined: Apr 2015
Post: #19
RE: OEM Rear Rack- Fitting
I think you could make a suitable spacer by using a cylinder spacer with a washer or two at the rack end of it. A bit harder to assemble when installing, but if you don't remove the rack often, it should be fine.
06-09-2015 07:16 AM
Find all posts by this user Quote this message in a reply
kennyw Offline
High Mileage

Gold Bar
Posts: 1,098
Joined: May 2015
Post: #20
RE: OEM Rear Rack- Fitting
(06-09-2015 07:16 AM)Redbird Wrote:  I think you could make a suitable spacer by using a cylinder spacer

I bought some hardware store spacers and will be turning them down on a lathe today. The longer bolts I purchased were too short so I have another trip to make.
06-09-2015 08:53 AM
Find all posts by this user Quote this message in a reply
Post Reply 


[-]
Forum Friends
Premium Exhausts & Unique Parts from Japan

[-]
Recent Posts
Suspension, have plan but input appreciated
Well for me the main reason I'm upgradin . . .W/R — 03:52 PM
CB1100 Monthly Photo Challenge
we have nothing other as modern......bco . . .alprider — 03:49 PM
Suspension, have plan but input appreciated
"But i'm still paranoid that i'm missing . . .el duque — 03:49 PM
2014 CB1100 Owners Registry
Jeff Frostburg, Maryland 2014 std #0944Buff7mm — 03:42 PM
CB1100 good for Touring?!
+1 on riding sans windscreen. The CB is . . .dbarkdoll — 03:42 PM
CB1100 good for Touring?!
Touring? Depends on what you consider t . . .4 Paws — 03:34 PM
Let's see your CB1100 out on the road!
well yes... i know i live in a curve/mou . . .alprider — 03:32 PM
5 or 6 speed? Gear indicator?
i use the 6th always too in villages/tow . . .alprider — 03:20 PM

[-]
Statistics
» Members: 4,075
» Latest member: Grumpy
» Forum threads: 10,531
» Forum posts: 192,728

Full Statistics

>
Forum Jump: