Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
bar end removal
Author Message
modmaster Offline
1st Service Completed

So. Milw. WI
Posts: 73
Joined: Jan 2016
Post: #1
bar end removal
So far from what I read on Chip Beck's handle bar thread, to remove the entire bar end weight assembly as a unit you have to depress the two spring steel tabs at the same time and the unit should all slide out. Is that correct?

modmaster

Bikes currently owned: 2015 FZ-07 fully modded, 2013 CB1100, clear Sport windshield, throttle lock, Staintune, adj. levers, modified OEM seat, Tec Usa piggyback adj. shocks, barbacks, Jet-Hot coating, gutted Cat, reflash, gaiters, OS elim, TSR air cov., red side covers.
03-10-2016 09:19 PM
Find all posts by this user Quote this message in a reply
kmoney Offline
High Mileage

Vancouver, BC
Posts: 908
Joined: Sep 2014
Post: #2
RE: bar end removal
Correct. You will need to remove (or possibly pull back) the grips in order to expose the two holes as well.
03-10-2016 09:53 PM
Find all posts by this user Quote this message in a reply
modmaster Offline
1st Service Completed

So. Milw. WI
Posts: 73
Joined: Jan 2016
Post: #3
RE: bar end removal
kmoney. Thanks for the reply.

modmaster

Bikes currently owned: 2015 FZ-07 fully modded, 2013 CB1100, clear Sport windshield, throttle lock, Staintune, adj. levers, modified OEM seat, Tec Usa piggyback adj. shocks, barbacks, Jet-Hot coating, gutted Cat, reflash, gaiters, OS elim, TSR air cov., red side covers.
03-11-2016 12:51 AM
Find all posts by this user Quote this message in a reply
p32077 Offline
New To The Forum

phoenix Az
Posts: 3
Joined: Feb 2017
Post: #4
RE: bar end removal
removing the inserts does that have any affect on the performance on the bike
02-03-2017 01:57 PM
Find all posts by this user Quote this message in a reply
IndianRider Offline
1st Service Completed

SF Bay Area, California / San Ramon
Posts: 149
Joined: Jan 2014
Post: #5
bar end removal
I figured out how to remove the stock long internal bar end damper by depressing those 2 clips first AFTER I replaced handlebars with aluminum enduro style wider/ taller bars and installed extra heavy weight Hudson Valley Motorsports parts bar ends and the bike is waaaayyy too smoooth now ..

Here is a generic pic ─░mage


Sent from my iPhone using Tapatalk

2013 Honda CB 1100 (Mods: Yoshimura SS slip-on with modified baffle, Protaper ATV HI Handlebars, HVMP Extra heavy bar weights, 5W Front fork oil, Taller Sprocket gearing 19T front and 37T rear, Spencer's firmer seat mod)
1976 Yamaha DT400 Yellow smoker
2005 BMW R1200 RT
(This post was last modified: 05-15-2017 01:57 PM by IndianRider.)
05-15-2017 01:53 PM
Find all posts by this user Quote this message in a reply
Post Reply 


[-]
Forum Friends
Premium Exhausts & Unique Parts from Japan

[-]
Recent Posts
CB1100 Monthly Photo Challenge
Just about 10 days left on the River Cha . . .EmptySea — 09:00 PM
A little update (hip related)
:rofl: isn't that the truth Thanks of . . .The ferret — 08:29 PM
A little update (hip related)
Hope your symptoms are improving with yo . . .offroadfx4 — 07:59 PM
Sparky's New Ride
We drive to Tampa tomorrow to pick up Sp . . .redbirds — 07:59 PM
Sparky's New Ride
Your mission, Mr redbirds, should you ch . . .Cormanus — 07:57 PM
BMW R NineT Racer S - Test Ride
I haven't seen the R nineT Racer, but I' . . .Guth — 07:57 PM
Sparky's New Ride
...somebody said BBQ? :heart:: . . .redbirds — 07:55 PM
Wash me
Mad Cormanus just doesn't have the same . . .Guth — 07:45 PM

[-]
Statistics
» Members: 3,954
» Latest member: acro
» Forum threads: 10,183
» Forum posts: 183,954

Full Statistics

>
Forum Jump: